A documented electrical history is one of the quieter assets a property carries. When a home in Camas changes hands, gets refinanced, or goes back on the rental market, a clear record of permitted panel work, updated wiring, and code-compliant circuit additions makes those conversations easier. Buyers ask questions. Inspectors look closely. The work done now becomes part of what the next owner inherits.
We handle residential and commercial electrical work across Camas and the surrounding Clark County area. Whether the call comes from a homeowner sorting out a problem that has been nagging for months or a landlord preparing a property for a new tenant, the process is the same: find the fault, explain what it involves, set the price before anything starts, and leave the property clean and powered when the job is done.
The price for any electrical job is shaped by what the fault actually turns out to be, what has to be opened up to reach it, and whether the existing wiring and panel can carry the change being asked of them. A dead outlet on its own is a different scope than a dead outlet that traces back to a loose connection at the panel or a failed circuit run behind a finished wall.
What has to be accessed matters too. Wiring that runs through an unfinished basement or an open attic is straightforward to trace and reach. Wiring buried in finished walls takes more time and more care, and the quote reflects that honestly.
Call (971) 366-2895 and describe what you are seeing.
We scope the issue on the phone, give you the rate before anything is scheduled, and explain what the visit will cover. If something on site changes the scope, we talk through it before proceeding. The price is confirmed before the work begins, not handed over after it is done.
We do not offer a free estimate or a free inspection. What we offer is a clear answer on the call, so you know what you are committing to before anyone shows up at the door.
When power goes out or behaves strangely, the first question is whether the fault sits on the property side of the meter or on the utility's side. Partial power loss affecting one area of a home, a breaker that trips on a circuit with nothing drawing on it, or a section of the panel that reads dead are all situations that can point either direction.
We start at the meter and work inward. If the fault is in the service entrance, the main disconnect, or the wiring between the meter and the panel, that is our scope and we handle it. If the problem is upstream of the meter, that belongs to the utility. We tell you which it is, explain what we found, and, where the fault is theirs, walk you through what to report and who to contact. You are not left to figure that out on your own.
The Pacific Northwest sees real grid fluctuations, and wildfire-season shutoffs followed by restoration events can send voltage spikes through a home's wiring in a fraction of a second. A panel-level surge protector catches those spikes before they reach appliances, electronics, and the circuits feeding major equipment. It is a single device installed at the panel, properly grounded, that covers every circuit in the house rather than just the outlets a power strip happens to reach.
Older homes in Camas sometimes still carry knob-and-tube wiring in parts of the house that have not been touched in decades. That wiring was not designed for the loads a modern household puts on it, and it lacks a ground conductor, which matters for both safety and the function of modern devices. Replacement involves running new circuits to current code, addressing grounding and bonding throughout the affected areas, and confirming the panel can carry what the updated wiring will deliver.
A dead outlet or a switch that stopped responding is sometimes a quick fix at the device itself and sometimes the first sign of a wiring fault deeper in the circuit. We diagnose before we replace. GFCI outlets are required by code near water: kitchens, bathrooms, garages, and outdoor locations. AFCI protection addresses arc faults in bedroom and living-space circuits. Both are code requirements in new and updated work, and both come up regularly in homes that have had partial updates over the years without a full review of what is where.
A detached garage or a workshop that needs more than a single circuit benefits from a subpanel fed from the main panel rather than a string of circuits run individually. The subpanel sits at the outbuilding, distributes the load across dedicated circuits for tools, lighting, and outlets, and keeps the main panel from being pushed past its capacity. We size the feed and the subpanel to what the space will actually run, not just what it runs today.
A home that started with a 100-amp service and has since added an EV charger circuit, a workshop, and a modern kitchen is often running closer to its limit than the panel shows on a quiet day. A service upgrade to 200-amp service involves replacing the main panel, updating the service entrance, and confirming the meter and utility connection can carry the increased load. Where an EV charger is the trigger for the upgrade, we scope both pieces of work together so the panel is right for the charger and for everything else running on it. The full breakdown is on our page of electrical services.
Call (971) 366-2895 during our hours, every day from 8:00 AM to 10:00 PM, and describe what you are dealing with.
We scope the job on the phone, confirm the price, and set the appointment. Electrical service scheduled without the runaround is what we aim for. If you cannot be home for the visit, we work out access on the scheduling call so nothing is held up on the day.
A sparking outlet, a burning smell near a panel or receptacle, or a breaker that will not hold on a circuit feeding critical equipment are situations that need attention the same day. Call and describe what you are seeing. We take short-notice work within our operating hours and can usually give you a realistic read on availability on the call itself.
For commercial properties and occupied rentals, we coordinate around the hours that matter. A tenant who cannot lose power to a refrigerator or a business that has to stay open through the day gets that conversation on the scheduling call, not as a surprise on the day of the visit. We confirm what access is needed and what, if anything, needs to be shut down and for how long.
Camas has a real mix of housing: established neighborhoods with homes built across several decades, properties that have been added onto, and older structures whose electrical systems were designed around a fraction of the load a modern household draws. When a homeowner wants to add an EV charger, a hot tub circuit, or a subpanel for a detached workshop, the first question is whether the existing service can carry it.
We start with a load calculation. That tells us what the panel is currently running, what headroom is left, and whether the proposed addition fits within it. If it does, we run the circuit and confirm grounding and bonding are correct throughout. If it does not, a service upgrade is the conversation that follows. We explain both paths, what each involves, and what the price looks like before anything is decided. Fast diagnosis. Pricing set out up front. Clean work.
EV charger circuits come up often in this part of Washington. Oregon leads the country in EV adoption and the same pattern holds across the Columbia River in Clark County. A Level 2 charger requires a dedicated 240-volt circuit sized to the charger's draw. We confirm the panel can carry it, run the circuit to where the charger will be mounted, and handle the grounding. If the panel needs an upgrade to accommodate it, that gets scoped as part of the same visit.
We cover Camas and the surrounding Clark County area. That includes Washougal to the east, Fern Prairie, Fairview, Wood Village, and Troutdale across the river into the Portland metro. If your property is in this part of the region and you need electrical work handled properly, the call is the same regardless of which community you are in.
We service this area, and its neighborhoods each have their own wiring. An older home on the west side of Camas may carry a different set of electrical realities than a newer build on the edge of town, and a property that has changed hands several times often has a patchwork of updates that need a careful look before new work is added. That context shapes how we approach a job, from the first call to the last connection.
We make access points as small as the work allows, but patching plaster and drywall is not part of our scope. We can tell you what was opened so you know what to hand off to a drywall finisher or drywaller after we finish.
We separate what needs immediate attention from what can be addressed on a planned schedule. Safety-critical findings come first, and we explain the reasoning so you can make an informed decision about what to tackle and when.
Minor repairs can often be handled on the same visit. Larger work, like a panel replacement or a rewiring project, gets scoped separately and scheduled as its own job.
Yes. We take work across Camas and the surrounding area, including Washougal, Fern Prairie, Fairview, Wood Village, and Troutdale. The scheduling process is the same regardless of which community the property is in: call, scope the job on the phone, confirm the price, and set the appointment.
Most electrical work can be done with the tenant in place. We plan the shutdown windows to keep disruption short and confirm the sequence with whoever is coordinating the visit.
We confirm the sequence on the call and work around the schedule the general contractor or homeowner has set. Rough-in happens before the walls close, and trim-out happens after they are finished, so the timing relative to drywall and painting matters.
Older homes in the Camas area often carry wiring configurations that were code-compliant when they were installed but no longer meet current standards. Knob-and-tube wiring, two-wire circuits without a ground, and aluminum branch wiring all come up in homes that have not had a full electrical review in some time. The age of the home shapes what a diagnostic visit looks for, and we explain what we find before any work is proposed.
Call (971) 366-2895 for a quote.
We are available every day from 8:00 AM to 10:00 PM. Reach out and we'll start at the panel. When the work is done, we leave the property clean: drop cloths come up, access points are closed, and nothing is left for you to deal with after we go. Call Tigard Electrical Company and get the job done properly.
The rest are on our service map. Also serving: Orchards, Vancouver, Hazel Dell.
We cover the full range of residential and commercial electrical work in Camas and across Clark County. The table below lays out what each service involves, who it fits best, and what is worth knowing before you call. Pricing is confirmed on the call before anything is scheduled, and every job is scoped clearly so you know what to expect.
| Service Type | What It Covers | Ideal For | Good to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular |
| Homes and commercial properties that have outgrown their current panel capacity or still have a fuse box | A load calculation is part of every panel upgrade so the new equipment is sized to what the property actually draws. |
| Breaker & Fuse Repair |
| Any property where a breaker will not hold or a fuse box is causing reliability issues | A breaker that trips repeatedly on a lightly loaded circuit usually points to a fault on the run, not just the breaker itself. |
| Outlet & Switch Installation |
| Homeowners updating kitchens, bathrooms, or garages, or replacing outlets that have stopped working | GFCI protection is a code requirement near water sources. We confirm which locations apply during the visit. |
Call (971) 366-2895 to describe the job, get a rate, and schedule a visit. We are available every day from 8:00 AM to 10:00 PM.
(971) 366-2895